Widely Application for the Wireless Caregiver Pager
Elderly or Patient Care: The push button transmitter can be used for emergency call for the eldely or patient. It is battery powered, easy to access for them too.
Morning Call for Children: Hassled to get the children up in the morning for school? Don’t worry, just press the call button, your kids will wake up on time, never be late for school.
Good for massage therapists: The perfect answer to knowing for sure when the client is ready, without waiting too long to enter the room or not giving them enough time before knocking.
Perfect for home, hospital, shop: Use our wireless pager to take care of your family better.
5 Levels Volume & LED Flash
Silent mode with just LED flash is available when you don’t want to be disturbed.
Modern & stylish design
Approx. 500+feet operation range (open area)
5 Levels of volume (from 0dB to 110dB)
Low power consumption
Working voltage of Receiver:110-260V
Battery in Transmitter:CR2032 Battery
Working distance:250ft In open area.
NOTE: The transmitter requires a CR2032 battery which is already included and not rechargeable. The Receiver plugs into a wall outlet and requires no battery.
It given you peace of mind and a good nights sleep
Because the caregiver can’t always stay together with patients or the disabled, what to do when they need help especially during night? They can get timely and considerate care without yelling by just pressing the button.
Know where your patient is by setting different ringtones
Place one call button near bed, one on wheelchair or in bathroom. Your family can call you when they need you, just like in a hospital.
You can program each button to a different tone so you know where your patient are. This is a very convenient feature.
All receivers to chime regardless of which call button is pushed, but different tone for each button.
How to set your tone
1) Plug in the receiver, press the music button of the receiver to select tones.
2) Press & hold volume button until led lights up , then press the button on transmitter. Led on receiver should flash indicating they have been paired.
3) Take the SAME transmitter to the 2nd receiver and repeat steps 1&2.
4) Repeat the same process with the 2nd transmitter.
Each pager set has been paired before factory, sometimes if the pager is stored for a long time, the pairing may fail, when it happens, please try the steps above.
It is not only suitable for private households, but also for hospitals, nursing homes and any other place.